These shrouds will fit any of the Bsa multi-shot PCP rifles with a straight front breech.  (not suitable for S10 and some of the very early low breech single shot rifles and rifles with an angled breech at the front)

Not only do they look good but they also work very well at quietening down the muzzle report of BSA PCP air rifles. When the baffles have been fitted in the best configuration, the shrouds are as quiet or quieter than most off the shelf silencers/moderators. For the maximum performance in quieting your rifle the shrouds are made calibre specific.

They are made out of 27mm OD aluminum tube to keep the weight down, then sand blasted and matte black anodized.
The fitting is directly on the barrel and the fitting screws are covered by the shroud when it is screwed on.
The shrouds are made to be around 140mm (5.5″) longer than the end of your barrel. The longer they are the more internal volume there is, which translates to a quieter muzzle report.

Please be aware that the shroud is a little higher than the top of the scope rail, so check you scope rings before you assemble the shroud.

15″ model (standard R-10 and Scorpion), they are around 18″ (465mm) long overall

18.5″ model (standard on the FAC/Export Scorpion and FAC/Export R-10), they are around 21.75″ (550mm) long overall.

How to measure your barrel length >here<

They are supplied with the shroud tube, barrel adaptor, back-flow bush, baffles, steel wired curlers, and sound reducting felt.

At this stage they are only suitable for barrels that have a threaded end for a moderator.

Huma-Air shroud fitting video made by XTX-Air in the UK

Delivered to your door by our home delivery service.