The 0db Stealth Silencer Pro System Kit is part of the 0dB Pro System and represents the pinnacle in airgun silencer and barrel tuner (harmoniser) technology.

The 0db Ultimate Pro System Kit comes in a hardshell, custom-fitted case that includes:

• Poly Hard Shell Case
• Stealth Moderator (with end cap) 1/2″ UNF Female
• Extension Module (Mini Moderator)
• x3 (.177/.22, .25, .30) baffle inserts for Stealth Silencer
• x3 (.177/.22, .25, .30) baffle inserts for Extension Module
• End Cap Removal Tool

Stealth Silencer Pro

The Stealth Silencer Pro (SSP) suppresses the sound of your rifle’s muzzle report. It can be set up to suit .177/.22, .25 and .30 air rifles because it is caliber-specific. Its female thread fits 1/2″ threaded muzzles.

The stealth silencer in the 0db Stealth Silencer Pro System Kit is lightweight aluminium, hard-anodised and satin bronze finished. It measures 85mm long, weighs just 94g with an external diameter of 40mm.

The SSP is supplied with three, caliber-specific baffles, each marked accordingly. The baffles are acoustically designed and manufactured from composite, using state-of-the-art 3D Additive printing Technology. To change or clean a baffle, simply unscrew the silencer end cap with the supplied tool. Important: Always fit the correct baffle to suit the caliber of your rifle.

The silencer strips down, so it is easy to clean. Access to the acoustic foam, baffle and gauze is via its removable end cap. This unscrews with the End Cap Removal Tool. Every SSP Kit comes with one, but the tool can also be purchased separately.

The Stealth Silencer Pro is only available as part of a kit. The kit comes in a foam-filled, hard polypropylene case, with a lid marked ‘0dB’.

Regardless of kit designation, the Stealth Silencer Pro System also includes the screw-on Extension Module. You can also fit more Modules, however these must be purchased separately.

End Cap Removal Tool

This Tool removes the end cap of the Silencer. This lets you change baffles or clean it. You also use the tool to fit/remove an Extension Module to/from either the Silencer or Tuner. A 0dB Pro System End Cap Removal Tool is supplied with every Pro System Kit. However, the tool is not supplied when either the Advantage Target Pro Tuner or Extension Module is purchased individually.