If you thought Sumo was quiet wait until you hear Donny FL Shogun.

The Donny FL Shogun is just like the Sumo but 1.5 inches longer. DonnyFL added an additional 1 inch chamber as well  as increase the first expansion chamber by .5 inches and the chamber by the exit hole another .5 inches. This design is very effective.

• 1/2 x 20 UNF threaded end cap
• Mono-core design to increase accuracy and limit the chances of pellet clipping
• No moving parts or epoxy that may become loose after 1000s of rounds
• Precision CNCd by professional machinist
• Sand blasted and anodized for maximum durability
• Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
• Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
• Comes pre-wrapped in felt
• Machined grooves on the outside for easy handling.
• Weight 7.2 oz

*Note: If you see white lines on the inside of the front cap, that’s ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.
*Airgun use only

As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if you’re looking for a .177 Donny FL would recommend using a .22. or if you’re looking .25, you should opt for a .30