The Donny FL Ronin is big and bold.

Donny FL Ronin Features:

• 1/2 x 20 UNF, Big bore (M18x1).Vulcan (M14x1.25) and FX (M20x1) rear caps available
• Mono-core design to increase accuracy and limit the chances of pellet clipping
• No moving parts or epoxy that may become loose after 1000s of rounds
• Precision CNCd by professional machinist
• Sand blasted and anodized for maximum durability
• Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
• Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
• Comes pre-wrapped in felt
• Machined grooves on the outside for easy handling.
• Weight 10.4 oz

*Note: If you see white lines on the inside of the front cap of your Donny FL Ronin, that’s ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.
*Airgun use only

As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if you’re looking for a .177 DonnyFL would recommend using a .22. or if you’re looking .25, you should opt for a .30

Please Note:
Due to licensing laws we are unable to send moderators through the post, they can either be collected from our shop, delivered directly by us or can be posted out to your local RFD.